Filter
Top Products
PERFORMANCE
POWER MIG
®
255XT
www.lincolnelectric.com
[2]
A CLOSER LOOK
FEATURES
PROCESS CAPABILITIES
Electrode Electrode Shielding Minimum Maximum
Process Wire Polarity Gas Thickness Thickness
(1)
MIG .025", .030", .035",.045"
Mild Steel (0.6, 0.8, 0.9,1.1 mm) DC+ 100% CO
2
or 24 ga. (.024") 1/2" (.500")
SuperArc
®
L50, L-56 Ar/CO
2
Blend (0.6 mm) (19.1 mm)
SuperGlide
®
S-3, S-6
MIG .030", .035", .045" Ar/CO
2
Blend 20 ga.(.036") 1/2" (.500")
Stainless (0.8, 0.9, 1.1mm) DC+ or Tri-Mix (0.9 mm) (19.1 mm)
Blue Max
®
308LSi, 309LSi, 316LSi
MIG 3/64" 1/16" (.063") 1/2" (.500")
Aluminum (1.2 mm) DC+ 100% Argon (1.6 mm) (19.1 mm)
SuperGlaze
®
4043 and 5356
Flux-Cored, .035", .045" 100% CO
2
or 12 ga. (.109") 1/2" (.500")
Gas-Shielded (0.9, 1.1 mm) DC+ Ar/CO
2
Blend (2.7 mm) (19.1 mm)
Mild Steel Outershield
®
71M and MC-710
Flux-Cored, .035", .045" 18 ga. (.050") 3/4" (.750")
Self-Shielded (0.9, 1.1 mm) DC- — (1.2 mm) (12.7 mm)
Mild Steel Innershield
®
NR
®
-211-MP
(2)
and NR
®
-212
(1)
Lincoln Electric recommends multiple passwelds on 1/2"(12.7 mm) material. Consult the appropriate application procedures and guidelines for selecting the correct wire size,
gas type and number of passes.
(2)
.035" and .045" (0.9 and 1.1 mm) NR
®
-211-MP is only recommended up to 5/16" (7.9 mm) thick material.
Grinders
Battery Chargers
for Cordless Tools
Work Lights
Welding Fume
Extraction
Rotary Tools
Saws
Energize Your Shop!
— The POWER MIG
®
255XT features a 115 volt auxiliary power
receptacle which allows you to power
grinders, lights, cordless tool chargers
or any other power tools.
(1)
What Is It?
Diamond Core Technology
™
is a patented innovative
choke design that filters the welding arc. It provides
dynamic optimized arc filtering across the entire
welding range of amperages. Other arc stabilization
methods are “fixed” – or only working at certain
amperages – resulting in harsh arc characteristic
changes over the welding range.
Results:
• Great starts and low spatter.
• Outstanding performance on
a wide variety of materials –
steel, stainless and aluminum.
• A wide sweet spot for optimal
arc performance.
Great For:
• Steel, stainless and aluminum.
• Out-of-position work.
• Long arc applications.
• Weaving techniques.
(1)
115V auxiliary power is only available on 208/230V models.