Filter
Top Products
POWER MIG
®
255XT
www.lincolnelectric.com
[ 7]
RECOMMENDED OPTIONS
Magnum
®
SG Spool Gun Control
Cable Adapter
Allows the K487-25 Magnum
®
SG
Spool Gun’s 6-pin control cable
plug to connect to the POWER
MIG
®
255XT’s 7-pin spool gun
control cable receptacle.
Order K2445-1
Magnum
®
250LX Spool Gun
Control Cable Extension
Extend your spool gun reach with
a 25 ft. (7.6 m) Control Cable
Extension. Features a 7-pin female
MS-type connector on the spool
gun end and a 7-pin male MS-type
connector on the power source end.
Order K2519-1
Spool Gun Holder
Provides neat storage of spool
gun.
Order K1738-1
Magnum
®
Guns
Alternate guns can be used with
the POWER MIG
®
, including
Magnum
®
200, 300 and 400 MIG
(GMAW) models, as well as
Magnum
®
250XA Fume Extraction
Gun.
See Publications E12.10 and
E13.10 for details.
Note: Requires K466-6 Adapter Kit.
Magnum
®
Connection Kit
Permits use of Magnum
®
200, 300
and 400 gun and cable assemblies
on POWER MIG
®
.
Order K466-6
8" O.D. Spool Adapter
Permits 8" (200mm) O.D. spools
to be mounted on 2" (51 mm)
O.D. spindles.
Order K468
Welding Fume Extractors
Lincoln offers a wide variety
of welding fume extraction
environmental system solutions,
ranging from portable systems
easily wheeled around the shop
to shop-wide central systems
servicing many dedicated welding
stations.
Request Publication E13.40
GENERAL OPTIONS
Magnum
®
SG Spool Gun
250 Amp, 60% Duty Cycle with
25 ft. of cable length. Feeds
.025” - 3/64” inch diameter wire.
Single Turn remote wire feed
speed control at the gun.
Adjustable wire spool brake and
adjustable drive roll tension.
Order K487-25
Requires K2445-1 Adapter
Magnum
®
250LX Spool Gun
300 Amp, 60% Duty Cycle with
25 ft. of cable length. Feeds
.025” - 3/64” inch diameter wire.
Multi-Turn remote wire feed
speed control at the gun. Deluxe
wire spool break requires no
adjustments. Adjustable drive roll
tension and easy open wire drive
rolls for easy wire loading.
Ergonomic Sure Grip handle.
Contact tip storage built in spool
gun cover.
K2490-1
Factory Ready
Dual Cylinder Mounting Kit
Permits side-by-side mounting
of two full size gas cylinders,
with easy loading. Attaches
easily to POWER MIG
®
undercarriage.
Order K1702-1
Canvas Cover
Protect your POWER MIG
®
when
not in use. Made from attractive
red canvas that is flame retardant,
mildew resistant and water
repellent. Fits any POWER MIG
®
machine with or without a gas
cylinder in the cylinder rack.
Will not fit if spool gun holder is
attached to the machine.
Order K2378-1
Aluminum Feeding Kit
Conversion kit for welding with
3/64" (1.2 mm) aluminum wire.
Includes drive rolls, contact tips
(2), non-metallic wire guides and
cable liner.
Order K1703-1