Filter
Top Products
10
Pipeliner
www.lincolnelectric.com
PIPELINER 16P AWS: E7016 H4 Low Hydrogen Stick (SMAW) Electrode
We designed this quality electrode
for optimum performance for verti-
cal up welding of pipe up to API 5L-
X65 – especially where a low hydro-
g
en deposit is desired. Obtain
Charpy V-Notch impact values down
to temperatures of -20°F (-29°C).
ADVANTAGE LINCOLN
• Excellent low temperature impact
properties.
• Square burnoff makes welding
easier, especially in critical pipe
welding applications.
• Manufactured under a quality
system certified to ISO 9001
requirements.
• Manufactured to actual lot control.
Actual certificates of conformance
a
re available upon request.
TYPICAL APPLICATIONS
• Primarily designed for vertical up
root and fill pass welding of high
strength pipe up to and including
API 5L-X65.
• Open gap root pass welding with
2.5mm (3/32”) and 3.2mm (1/8”)
diameters using DC± polarity.
CONFORMANCE
AWS A5.1: E7016 H4
ASME SFA-5.1: E7016 H4
Charpy V-Notch
Yield Strength Tensile Strength Elongation ft•lbf (Joules)
psi (MPa) psi (MPa) (%) @ -20ºF (-29ºC)
Required 58,000 (400) 70,000 (480) 22 20 (27)
AWS E7016 H4 min. min. min. min.
Typical Results 65,000 - 82,000 80,000 - 93,000
25 - 32
40 - 90
As-welded (448 - 566) (550 - 641) (54 - 122)
Manufactured in metric diameters,
U.S. Customary sizes are approximate.
MECHANICAL PROPERTIES
- As Required per AWS A5.1-91
WELDING POSITIONS
2F
2G
3G
➔
1G
4G
5G
➔
%C %Mn %Si %S %P %Cr %Mo %Ni %V
Requirements Not 1.60 .75 Not Not .20 .30 .30 .08
AWS E7016 H4 Specified max. max. Specified Specified max. max. max. max.
Typical Results .05-.08 1.0-1.5 .40-.60 .010-.020 .008-.015 .02-.05 .01-.03 .01-.05 .01-.03
DEPOSIT COMPOSITION
- As Required per AWS A5.1-91
NOTE: Pipeliner electrodes are
manufactured under lot control.
A Certificate of Test showing
actual deposit chemistry and
mechanical properties per AWS
A5.1 (DC+ only) is available on
request from the factory
for every lot of electrode.
(Fax 216-383-8386).
DIAMETERS / PACKAGING
Diameter 22.7 kg (50 lb.)
mm (in.) Easy Open Cans
2.5 (3/32) ED030916
3.2 (1/8) ED030917
4.0 (5/32) ED030918
Current (Amps)
Polarity
2.5mm 3.2mm 4.0mm
(3/32") (1/8") (5/32")
DC+ 55 - 80 75 - 120 120 - 160
AC 60 - 80 80 - 120 120 - 160
TYPICAL OPERATING PROCEDURES
(mL/100g
weld deposit)
Requirements
AWS E7016 H4 4
Typical Results 2 - 4
DIFFUSIBLE
HYDROGEN
As Required per AWS A5.1-91