Filter
Top Products
12
Pipeliner
www.lincolnelectric.com
PIPELINER 70S-G AWS: ER70S-G All Position MIG (GMAW) Wire Electrode
Pipeliner 70S-G MIG wire electrode
is especially intended and pack-
aged for the needs of semiauto-
matic and automatic root pass pipe
w
elding. Delivering low hydrogen
deposits, 70S-G exhibits an extremely
fluid puddle for outstanding wash-in
at the weld toes and uniform bead
shape. Well-suited for use on
API 5L-X56 through X70 pipe.
ADVANTAGE LINCOLN
• Clean weld deposit.
• Uniform bead shape.
•Fluid puddle provides good wash-in
at the weld toes.
• Manufactured to actual lot control
and testing. Actual certificates of
conformance are available upon
request.
• Foil bag packaging guards against
moisture.
• Manufactured under a quality sys-
tem certified to ISO 9001 require-
ments.
TYPICAL APPLICATIONS
• Primarily intended for all-position
root pass welding on pipe steels
such as API 5L, 5L-X56 through
5L-X70
• Capable of consistent x-ray quality
welds.
• Typical applications include high-
yield pipe steels.
CONFORMANCE
AWS A5.18-2001: ER70S-G
ASME SFA-5.18: ER70S-G
ELECTRODE COMPOSITION
-As Required per AWS A5.18:2001
WELDING POSITIONS
1G
2F
2G
3G
➔
5
G
➔
DIAMETERS / PACKAGING
4G
MECHANICAL PROPERTIES
- As Required per AWS A5.18:2001
NOTE: Pipeliner electrodes
are manufactured under
lot control. A Certificate
of Test showing actual
deposit chemistry and
mechanical properties
per AWS A5.18 is available
on request from the
factory for every lot of
electrode.
(Fax 216-383-8386).
Diameter 10 Lb. (4.5 kg) 30 Lb. (13.6 kg)
in. (mm) Plastic Spool Plastic Spool
in Foil Bag in Foil Bag
.045 (1.1) ED030904 ED030905
Charpy V-Notch
Yield Strength Tensile Strength Elongation ft•lbf (Joules)
psi (MPa) psi (MPa) (%) @ 0ºF (-18ºC)
Required 58,000 (400) 70,000 (480) 22 Not
AWS ER70S-G min. min. min. Required
As welded with CO
2
Typical Results
As welded with CO
2
63,700 76,200 30 70 (95)
(439) (525)
%C %Mn %Si %S %P %Cu
Requirements
AWS A5.18
Typical Results .06-.15 .90-1.40 .45-.75 .035 max. .025 max. .50 max.
Typical Range
Not Specified
TYPICAL OPERATING
PROCEDURES
Diameter
Parameters .045 in. (1.1 mm)
Polarity DC+
CTWD
(1)
– in (mm) 1/2-3/4 (12-19)
Wire Weight – lbs/in (g/m) NA
Wire Feed Speed – in/min (m/min) 125-500 (3.2-12.7)
Arc Voltage (volts) 19-30
Approx. Current (amps) 145-340
Melt-off Rate – lbs/hr (kg/hr) 3.4-13.2 (1.5-6.0)
Deposition Rate – lbs/hr (kg/hr) NA
(1)
CTWD (Contact Tip to Work Distance). Subtract 1/4" to
calculate Electrical Stickout.