Filter
Top Products
GENERAL OPTIONS
Power Plug Kit
Provides four 120V plugs rated at 20
amps each, and one dual voltage,
full KVA plug rated at 120/240V, 50
amps. 120V plug may not be
compatible with common household
receptacles.
Order K802N
Power Plug Kit
Provides four 120V plugs rated at 15
amps each, and one dual voltage, full
KVA plug rated at 120/240V, 50 amps.
120V plug is compatible with common
household receptacles.
Order K802R
Full-KVA Power Plug
One dual voltage plug rated at
120/240V, 50 amps. NEMA 14-50P.
Order T12153-9
GFCI Receptacle Kit
Includes one UL approved 120V
ground fault circuit interrupter
duplex type receptacle and installa-
tion instructions. Replaces the fac-
tory-installed 120V duplex recepta-
cle. Each receptacle of the GFCI
duplex is rated at 20 amps.
Maximum total current from the
GFCI duplex is limited to 20 amps.
Two kits required for all 120V recep-
tacles on the Ranger 305G.
Order K1690-1
Spark Arrester Kit
Attaches between muffler and
exhaust elbow. Virtually eliminates
spark emissions.
Order K1898-1
Canvas Cover
To protect the engine drive when not
in use. Made from attractive red can-
vas material that is flame retardant,
mildew resistant and water repellent.
Order K886-2
All-Terrain Undercarriage
For moving by hand at construction
sites. Maneuvers over obstacles.
Heavy-duty puncture-resistant tires.
Order K1737-1
Factory Undercarriage
For moving by hand on smooth
surface floors. Heavy-duty, puncture-
resistant tires and front caster.
Convenient steering handle.
Order K1770-1
GENERAL OPTIONS CONT.
Welding Gas Cylinder/
LPG Tank Holder
Holds welding gas cylinder or LPG
tank (for products with LPG engine).
For LPG: Use first holder for LPG tank
and second holder for welding gas
cylinder. Both holders will attach to the
K1770-1 undercarriage.
Order K1745-1
Cable Carrier Kit
Holds two 100 ft. (30.5 m) lengths of
#2/0 or smaller cable. Includes holder
tray for electrodes or miscellaneous
items. For use with K1737-1 or
K1770-1 undercarriage.
Order K1739-1
Roll Cage
Improves damage protection and
includes built-in cable rack. Attaches
to K1737-1 or K1770-1 undercarriage.
Can mount to a K2635-1 trailer.
Order K1788-1
Small Two Wheel Welder Trailer
For heavy-duty road, off-road, plant
and yard use. Includes pivoting jack
stand, safety chains, and 13" wheels.
Stiff .120" welded rectangular steel
tube frame construction is phosphate
etched and powder coat painted for
superior rust and corrosion resistance.
Low sway suspension gives outstand-
ing stability with manageable tongue
weight. Wheel bearings are packed
with high viscosity, high pressure, low
washout Lubriplate
®
grease. Includes a
Duo-Hitch™, a 2" ball/lunette eye
combination hitch. Overall width 60".
Order:
K2635-1 Trailer
K2639-1 Fender & Light Kit
K2640-1 Cable Rack
STICK OPTIONS
Accessory Kit
For stick welding. Includes 35 ft.
(10.7 m) #2/0 electrode cable, 30 ft.
(9.1 m) #2/0 work cable, headshield,
workclamp and electrode holder. 400
amp capacity.
Order K704
Accessory Kit
For Stick welding. Includes 20 ft.
(6.1 m) #6 electrode cable with lug,
15 ft. (4.6 m) #6 work cable with lugs,
headshield, filter plate, work clamp,
electrode holder and sample pack of
mild steel electrode. 150 amp capacity.
Order K875
Ranger
®
305G
www.lincolnelectric.com
[5]
RECOMMENDED OPTIONS
120V
120V