Filter
Top Products
RECOMMENDED OPTIONS
Ranger
®
305G
www.lincolnelectric.com
[6]
STICK OPTIONS CONT.
Remote Control Kit
Consists of a control box with choice
of two cable lengths. Permits remote
adjustment
of output.
Order K857 for 25 ft. (7.6 m)
K857-1 for 100 ft. (30.5 m)
TIG OPTIONS
Pro-Torch
®
PTA-26V TIG Torch
Air-Cooled 200 amp torch equipped
with valve for gas flow control.
25 ft. length.
Order K1783-9
Foot Amptrol
Varies current while welding for mak-
ing critical TIG welds and crater fill-
ing. Depress pedal to increase cur-
rent. Depressing pedal fully achieves
maximum set current. Fully raising
the pedal finishes the weld and starts
the afterflow cycle. Includes 25 ft.
(7.6 m) control cable.
Order K870
Hand Amptrol
Provides 25 ft. (7.6 m) of remote cur-
rent control for TIG welding.
(6 pin plug connection). Velcro straps
secure torch.
Order K963-3 (one size fits all Pro-
Torch TIG torches).
Magnum
®
Parts Kit for
PTA-26V TIG Torch
Magnum Parts Kit provides all the
torch accessories you need to start
welding. Parts kit provides collets,
collet bodies, a back cap, alumina
nozzles and tungstens in a variety of
sizes, all packaged in an easy to
carry reclosable pack.
Order KP509
Precision TIG
®
225 Ready-Pak
®
For AC TIG welding with square
wave performance, use the AC gen-
erator of the engine-driven welder to
supply the power. Easy setup.
Includes torch, foot amptrol, gas reg-
ulator and hose. Requires the
K1816-1 Full KVA adapter kit.
Order K2535-1
TIG OPTIONS CONT.
Invertec
®
V205-T AC/DC
One-Pak
®
Package
For AC TIG welding with square
wave performance use the AC gen-
erator of the engine-driven welder to
supply the power. Easy setup.
Includes torch, parts kit, regulator
and hose kit, TwistMate
TM
torch
adapter, work cable with Twist-Mate
end, and foot Amptrol
®
. Requires the
K1816-1 Full-KVA Adapter Kit.
Order K2350-1
Full - KVA Adapter Kit
Provides convenient connection of
Lincoln Electric equipment having a
240V AC 1-phase plug (NEMA 6-
50P) to the full-KVA receptacle on
Lincoln engine-driven welders.
Order K1816-1
WIRE FEEDERS
LN-25 Wire Feeder
Portable CC/CV unit for flux-cored
and MIG welding. Includes Gas
Solenoid & Internal Contactor.
Order K449
LN-15 Across-The-Arc Wire
Feeder
Portable CC/CV unit for flux-cored
and MIG welding. Includes gas sole-
noid, adjustable flow meter and
internal contactor. For
10-15 lb. (4.5-6.8 kg) spools.
Order K1870-1
Remote Voltage Control (LN-25)
Provides 25 ft. (7.6m) of remote out-
put control and output jumper
(2 and 4) for machines having
14-pin MS-type connector.
Order K444-2
Magnum® 350 Innershield Gun
(for LN-25, LN-15)
For self-shielded wire with 15 ft. (4.5
m) cable. For .062-3/32”
(1.6-2.4 mm) wire.
Order K126-2
Drive Roll and Guide Tube Kit
(for LN-25)
For .068-3/32” (1.8-2.4 mm) cored or
solid steel wire.
Order KP653-3/32
Drive Roll and and Wire Guide Kit
(for LN-15)
For 1/16” (1.6 mm) cored wire.
Order KP1697-1/16C