Filter
Top Products
WIRE FEEDERS CONT.
Gun Receiver Bushing
(For LN-15)
For use with K126-2 Magnum 350
Innershield Gun.
Order K1500-1
Magnum® 300 MIG Gun
For .035-.045” (0.9-1.2 mm) gas-
shielded wire with 15 ft. (4.5 m) cable.
LN-25
Order K1802-1
(includes Connector Kit)
LN-15
Order:
K470-2 Magnum 300 MIG Gun
K466-10 Connector Kit
Drive Roll and Guide Tube Kit
(for LN-25)
For .035-.040” (0.9-1.0 mm) solid
steel wire
Order KP653-035S
Drive Roll and Wire Guide Kit
(for LN-15)
For .035" (0.9 mm) solid steel wire.
Order KP1696-035S
LN-23P Wire Feeder
Portable CV unit for Innershield pipe
welding. Includes drive rolls and
guide tubes. Requires K2393-1 or -2
Input Cable Assembly and Magnum
®
Innershield Gun.
Order K316L-2
Input Cable Assembly for LN-23P
8-socket to 14-pin control cable with
lugged electrode cable for K316L-2
LN-23P Wire Feeder.
Order:
K2393-1 25 ft (7.6 m)
K2393-2 75 ft (22.9 m)
Magnum® 250 Innershield Gun
(for LN-23P)
For lighter weight and easier
handling. Rated 250 amps, 60%
duty cycle. For .068 - 5/64” (1.7 - 2.0
mm) Innershield wire and includes
reduced speed switch. For pipe
welding, a KP1909-1 62° gun tube is
recommended.
Order K355-10
Ranger
®
305G
www.lincolnelectric.com
[7]
RECOMMENDED OPTIONS
WIRE FEEDERS CONT.
62º Gun Tube for Pipe Welding
Recommended modification for
K355-X or K345-X guns with 90º gun
tubes. Allows more natural
positioning for out-of-position pipe
welding. Compatible with K126-1,
K126-2, K264-8 and K355-10.
Current capacity up to 350 amps.
Recommended diameters: .062 -
3/32” (1.6-2.8 mm).
Order KP1909-1
Magnum SG Spool Gun
Hand held semiautomatic wire
feeder. Requires SG Control Module
Order K487-25
SG Control Module
The interface between the power
source and the spool gun. Provides
control of wire speed and gas flow.
For use with a spool gun.
Order K488
Input Cable
(For SG Control Module)
For Lincoln engine power sources
with 14-pin MS-type connection,
separate 115V NEMA receptacles
and output stud connections.
Order K691-10
PLASMA CUTTING
Pro-Cut® 55
Cuts metal using the AC generator
power from the engine-driven welder.
Maximum cut thickness is 9/16" (14
mm). Requires the K1816-1
Full-KVA Adapter Kit.
Order K1580-1
Full - KVA Adapter Kit
Provides convenient connection of
Lincoln Electric equipment having a
240V AC 1-phase plug (NEMA 6-
50P) to the full-KVA receptacle on
Lincoln engine-driven welders.
Order K1816-1