Filter
Top Products
A-1
INSTALLATION
COMMANDER 300
A-1
TECHNICAL SPECIFICATIONS - Commander 300
Make/Model Displacement Description Speed (RPM) Starting Capacities
Diesel Engine System
125 cu. in
Deutz (2.05 L) 3 cylinder
F3L 1011F Bore x Stroke 31 HP(23 kw)
(Codes 11199 3.89” x 4.13” @ 1800 RPM Fuel: 25 gal.
and Below)
(99mm x 105mm) 94.6 L
High Idle 1900 12 VDC battery
Low Idle 1475 & Starter
Deutz 142 cu. in Full Load 1800 Oil: 6.3 Qts.
F3L2011 (2.33L) 3 cylinder 6.0 L
(Codes 11200
Bore x Stroke 32 HP(24 kw)
and above) 3.70” x 4.41” @ 1800 RPM
(94mm x 112mm)
INPUT - DIESEL ENGINE
RATED OUTPUT - WELDER
HEIGHT
2
WIDTH DEPTH WEIGHT
1325 lbs.(601 kg)
(Codes 11199 and
below)
40.0 in. 31.5 in. 63.1 in. 1327 lbs.(602 kg)
(Code 11200)
1016.0 mm 800.1 mm 1602.7 mm
1332 lbs.(604 kg)
(Code 11201)
OUTPUT - WELDER AND GENERATOR
Duty Cycle Welding Output Volts at Rated Amps
100%
300 amps (DC multi-purpose) 32 volts
60%
375 amps (DC multi-purpose) 34 volts
Welding Range Open Circuit Voltage Auxiliary Power
1
30-300 Amps CC / CV TIG 80 Max OCV 120/240 VAC
10,000 Watts, 60 Hz.
@1900 RPM 100% Duty Cycle
PHYSICAL DIMENSIONS
1. Output rating in watts is equivalent to volt-amperes at unity power factor.
Output voltage is within +/- 10% at all loads up to rated capacity. When welding, available auxiliary power will be reduced.
2. Top of Enclosure. Add 8.6” (218.4mm) for exhaust.