Lincoln Electric IM919 Welding System User Manual


 
E-2
TROUBLESHOOTING
E-2
RANGER® 250
Observe all Safety Guidelines detailed throughout this manual
If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely, contact your
Local Lincoln Authorized Field Service Facility for technical troubleshooting assistance before you proceed.
CAUTION
PROBLEMS
(SYMPTOMS)
POSSIBLE
CAUSE
RECOMMENDED
COURSE OF ACTION
Major Physical or Electrical
Damage is Evident.
Engine will not "crank".
Engine will "crank" but not start.
Engine shuts down shortly after
starting.
Battery does not stay charged.
1. I
f all recommended possible
areas of misadjustment have
been checked and the problem
persists,Contact your local
Lincoln Authorized Field
Service Facility.
1. Battery is low.
2. Loose battery cable connections.
3. Faulty engine starter motor.
4. “Battery Circuit” circuit breaker is
tripped.
1. Out of fuel.
2. Faulty fuel solenoid or faulty PC
board or ignition system.
3. Fuel pump not working.
1. Low oil level.
2. Faulty oil pressure switch or
other engine component.
1. Faulty battery.
2. Loose connections at battery or
alternator.
3. Faulty engine alternator or
charger module.
If all recommended possible areas
of misadjustment have been
checked and the problem persists,
Contact your local Lincoln
Authorized Field Service Facility.