Filter
Top Products
D-3
D-3
MAINTENANCE
GUN HANDLE DISASSEMBLY
The internal parts of the gun handle may be
inspected or serviced if necessary.
The gun handle consists of two halves that are
held together with a collar on each end. To
open up the handle, turn the collars approxi-
mately 60 degrees counterclockwise (the same
direction as removing a right hand thread) until
the collar reaches a stop. Then pull the collar
off the gun handle. If the collars are difficult to
turn, position the gun handle against a corner,
place a screwdriver against the tab on the col-
lar and give the screwdriver a sharp blow to
turn the collar past an internal locking rib.
Counterclockwise
➣
English Metric
Description Part No. Size Size
CABLE LINER
For 15' (4.5 m) or KP1934-2 .025 – .030" 0.6 – 0.8 mm
shorter Cable KP1934-1 .035 – .045" 0.9 – 1.2 mm
KP1955-1 3/64" 1.2 mm
(Alum. wire) (Alum. wire)
CONTACT TIPS
Standard Duty KP2020-6B1 .025" 0.6 mm
KP2020-7B1 .030" 0.8 mm
KP2020-1B1* .035" 0.9 mm
KP2020-2B1 .045" 1.2 mm
Heavy Duty KP2021-1B1 .035" 0.9 mm
KP2020-2B1 .045" 1.2 mm
Tapered KP2022-5B1 .025" 0.6 mm
KP2022-6B1 .030" 0.8 mm
KP2022-1B1 .035" 0.9 mm
KP2022-2B1 .045" 1.2 mm
Tab (For Aluminum) KP2010-5B1 3/64" 1.2 mm
(Alum. Wire) (Alum. Wire)
GAS NOZZLES
Fixed (Flush) KP1931-1 3/8" 9.5 mm
KP1931-2 * 1/2" 12.7 mm
KP1931-3 5/8" 15.9 mm
Fixed (Recessed) KP1930-1 3/8" 9.5 mm
KP1930-2 1/2" 12.7 mm
KP1930-3 5/8" 15.9 mm
Requires: Gas
Diffuser As'bly KP2026-3 * .025 – .045" 0.6 – 1.2 mm
Adjustable Slip-On KP1935-2 1/2" 12.7 mm
KP1935-1 5/8" 15.9 mm
Requires:
Nozzle Insulator KP2025-1
Asʼbly
Requires:
Gas Diffuser KP2026-2 .025 – .030" 0.6 – 0.8 mm
Asʼbly KP2026-1 .035 – .045" 0.9 – 1.2 mm
Gasless Nozzle KP1947-1 ∆
(For Innershield)
GUN TUBE ASSEMBLIES
Standard (60°) KP2015-1 *
45° KP2041-1
TABLE D.2
ACCESSORIES AND EXPENDABLE REPLACEMENT PARTS
FOR MAGNUM 250L GUN AND CABLE ASSEMBLIES
* Included with POWER MIG 215
∆ Requires KP2026-1 Gas Diffuser Assembly.
POWER MIG 215