Filter
Top Products
Invertec
®
V350-PRO
www.lincolnelectric.com
[2]
A CLOSER LOOK
PERFORMANCE
Exceptional Multi-Process Fabrication Welding
The Lincoln Invertec
®
V350-PRO inverter welder enables strong
multi-process welding performance with optimized arc
characteristics for each process.
• Fast arc response yields tight output control:
– More consistent bead appearance
– Smooth arc action
– Easy to follow puddle control
Five Welding Process Modes
1. CC-Stick Soft
Intended for low hydrogen stick applications.
Use to obtain outstanding E7018 performance for a variety of
construction and fabrication applications.
2. CC-Stick Crisp
Delivers a crisp shorting response optimized for cellulosic
(E6010) electrodes.
3. DC TIG GTAW
Standard Lincoln Touch-Start TIG
®
makes it easy to establish an arc.
Add the optional TIG Module for touch-less high frequency starting.
4. CV-Wire
Intended for use for most MIG, and gas-shielded flux-cored or metal-
cored applications.
The Invertec
®
V350-PRO features an exceptionally wide sweet spot
delivering the arc performance and finished weld quality every
operator appreciates:
• .030-1/16" (0.8-1.6 mm) solid wire
• .035-3/32" (0.9-2.4 mm) cored wire
Delivers outstanding performance with a wide variety of shielding gas
mixes, including 100% CO
2
, Ar/CO
2
or Ar/O shielding gas for carbon
steel as well as helium blends for stainless welding.
5. CV-Innershield
®
, Outershield
®
, Metalshield
®
and UltraCore
®
Features a wide voltage range and tight voltage control optimized for
Lincoln Innershield
®
self-shielded flux-cored applications and for gas
shielded flux-cored Lincoln
®
Outershield
®
procedures.
6. Arc Gouging accessible from all Stick and CV Welding Modes
With a maximum 425 amps, the Invertec
®
V350-PRO has plenty of
power to handle a 5/16" (7.9 mm) carbon.
Stick
Arc Gouging
CV-Wire
Stainless