Filter
Top Products
Invertec
®
V350-PRO
www.lincolnelectric.com
[7]
RECOMMENDED OPTIONS
TIG OPTIONS, CONʼT.
TIG Module Control Cable
(For Factory and Advanced
Process Models only)
9-pin connector at the TIG
Module to 14-pin MS type
connector at the power source.
(Contains input power, remote
control, contactor control, and
ground circuits). For machines
having a 14-pin remote control
and power receptacle.
Order K936-1
TIG Module Control Cable
(For Construction Model only)
9-pin connector at the TIG
Module to a grounded 115V plug.
(Contains input power, and
ground circuits). For machines
having no remote control
capability.
Order K936-4
Hand Amptrol
®
Provides 25 ft. (7.6 m) of remote
current control for TIG welding.
(6-pin plug connection)
Order K963-3
Foot Amptrol
®
Provides 25 ft. (7.6 m) of remote
current control for TIG welding.
(6-pin plug connection).
Order K870
Arc Start Switch
May be used in place of the Foot
or Hand Amptrol
®
. Comes with a
25 ft. (7.6 m) cable. Attaches to
the TIG torch for convenient finger
control to start and stop the weld
cycle at the current set on the
machine.
Order K814
Invertec
®
TIG Solenoid Kit
Mounts inside the back of the
V350-PRO. Switches gas flow in
the V350-PRO through the Twist-
Mate
™
connector. Includes gas
hose and solenoid. [Not compati-
ble with construction and factory
(Tweco
®
) models)].
Order K1762-2
TIG OPTIONS, CONʼT.
Twist-Mate
™
Torch Adapter
For connection of Pro-Torch™ TIG
torches (1 piece cable) to power
sources with gas passing through
the Twist-Mate
™
connection. For
use with K1762-2.
Order K1622-1 For air-cooled
PTA-9 or PTA-17 torches.
Order K1622-3 For air-cooled
PTA-26 torches.
Order K1622-2 For water-cooled
torches.
Twist-Mate
™
Torch Adapter
For connection of PTA-9 or
PTA-17V torches (1 piece cable)
to power sources without gas
passing through the Twist-Mate
™
connection.
Order K960-1
TIG-Mate
™
17V Air-Cooled
TIG Torch Starter Pack
Get everything you need for TIG
welding in one complete easy-to-
order kit packaged in its own
portable carrying case. Includes:
PTA-17V torch, parts kit, Harris
®
flowmeter/regulator, 10 ft. (3.0 m)
gas hose, and work clamp and
cable. Order K2265-1
TIG-Mate
™
17 Air-Cooled
TIG Torch Starter Pack
Get everything you need for TIG
welding in one complete easy-to-
order kit packaged in its own
portable carrying case. Includes:
PTA-17 torch, parts kit, Harris
®
flowmeter/regulator, 10 ft. (3.0 m)
gas hose, Twist-mate
™
adapter,
and work clamp and cable.
Order K2266-1
TIG-Mate
™
20 Water-Cooled
TIG Torch Starter Pack
Get everything you need for TIG
welding in one complete easy-to-
order kit packaged in its own
portable carrying case. Includes:
PTW-20 torch, parts kit, Harris
®
flowmeter/regulator, 10 ft. (3.0 m)
gas hose, Twist-Mate
™
adapter,
work clamp and cable and 10 ft.
(3.0 m) water hose.
Order K2267-1