Filter
Top Products
Power Wave AC/DC 1000
[10]
A CLOSER LOOK
www.lincolnelectric.com
Real-time welding data is
automatically recorded and saved
Operator Screen
Communication
Set Points
Remote Monitoring and Control
Monitor performance from anywhere in the world!
Waveforms are easily changed
through graphical interface
System Interface
The Power Wave AC/DC 1000™ includes software products to
assist with the installation and operation of the equipment. From
an intelligent configuration utility that allows you to automatically
sense and verify the system has been configured properly to a
tool capable of high-level monitoring, control, and data logging
for the system these packages were designed for ease of use
and convenience for the operators and the administrators.
Provides monitoring and control of each arc in a multiple arc system, presenting master/slave relationships and configuration of the arcs in
the system, as well as weld mode selection, parameters of weld states, and diagnostics.
Command Center
Effortlessly change welding
parameters for all arc states
Remotely monitor and diagnose
machine status and system
information
Diagnostics
Digital Communications
Fast, Reliable, System-Wide
ArcLink is the leading digital communications protocol for the arc welding industry. It integrates all welding components for seamless,
time-critical data transfer. The strength of ArcLink lies in the ability to communicate with each system component in a pre-defined welding
language. In addition, ArcLink is an open communications protocol, meaning that Lincoln Electric publishes how it works and encourages
other companies to adopt it.
DeviceNet is a communications protocol widely used throughout the automotive, semiconductor, and packaging industries. In its typical
application, DeviceNet works in conjunction with a programmable Logic Controller (PLC) and several system devices to provide a framework
for data trafficking and monitoring.
Ethernet is a specification for networking that provides the ability to pull large amounts of information into monitoring and supervisory applications.
For more information see Nextweld Document NX-1.30
Data Viewer