Filter
Top Products
Power Wave AC/DC 1000
[9]
A CLOSER LOOK
www.lincolnelectric.com
4
FEATURES
• Machines can be easily configured for multiple arc applications.
• Fully programmable AC or DC wave shape.
• Ethernet capability gives the user the ability to monitor, control
and troubleshoot from remote locations.
• All system components communicate and transfer information.
• Arc performance independent of input power variations.
• Utilizes digital signal processing and microprocessor control.
• Constant current or constant voltage capability.
Key Controls
1. Power Switch
2. Thermal Light
3. Status Light
4. Electrode Stud
5. 10 Amp Wire Feeder Circuit Breaker
6. Auxiliary Power Circuit Breaker
7. Wire Feeder Interface Connector
8. Work Sense Lead Connector
9. RS232 Connector
10. Arclink Connector
11. DeviceNET Connector
12. Ethernet Connector
13. Auxiliary Output
14. Work Stud
15. I/O Connector
3
2
1
6
5
15
14
13
12
11
10
9
8
7
QUALITY AND RELIABILITY
• Lincoln’s design philosophy adds an extra factor of safety in all
components and construction to maximize reliability and service.
• Open construction for preventative maintenance.
• Thermostatically protected against overheating.
• Electronic output over-current protection and electronic input
over-voltage protection.
• Operating Temperature Range: -20˚C (-37.7ºF) to +40˚C (-22.2ºF);
Storage Temperature Range: -40˚C (-40ºF) to +40˚C (-22.2ºF).
• Designed to the IEC 60974-1 standards.
• F.A.N. (Fan As Needed). Cooling fan runs during output and for five
minutes after output is turned off.
• Manufactured under a quality system certified to ISO 9001
requirements and ISO 14001 environmental standards.
• Three-year warranty on parts and labor.
• Printed circuit boards are environmentally-shielded using Lincoln's
engineered potting and protective frame trays.
• 100% software controlled – Software based controls can be
upgraded as new features become available.
• Easy access for serviceability.
• Modular construction allows for easy service/maintenance.