Filter
Top Products
[11]
Power Wave AC/DC 1000
www.lincolnelectric.com
RECOMMENDED OPTIONS
WIRE FEEDER OPTIONS
Power Feed 10A Controller
Control box required per arc.
Includes MSP4 User Interface
Panel, inputs/outputs for hard
automation.
Order K2362-1
Power Feed 10S Head
(3/32” to 7/32” solid wire)
Includes wire feeder head with
straightener for solid wire, flux
hopper with automatic valve,
head mounting and cross stream
adjuster. Does not include control
box or wire reel brake and
mounting.
Order K2370-1
Power Feed 10SF Head
(3/32” to 7/32” solid wire)
For machinery and fixture
builders. Fixture mount wire drive
assembly includes motor, gear-
box, drive rolls, guidelines,
straightener. Does not include
head mounting, electrode cables,
cross seam adjuster, flux hopper
and pointer.
Order K2312-1
Power Feed 10SM Motor
Conversion Kit
For use with NA Series Gear
Head. ArcLink™ motor retrofit kit.
Used to replace existing motor on
NA3/4 or NA5 wire feed head.
Order K2311-1
GENERAL OPTIONS
System Interface
External controller required for
multi-arc applications provides
arc-to-arc phase relationship.
Order K2282-1
Interface Control Cable (22-pin)
Required to parallel multiple
Power Wave power sources —
one per machine required. Can
be extended.
Order K1795-XX
ArcLink/Linc-Net Cable (5-pin)
Includes two leads plus two
mating terminals. Connects
Power Feed to Power Wave.
Can be extended.
Order K1543-XX
Feeder Control Cable (14-pin)
Connects Power Wave power
source to wire feeder. Cannot
be extended.
Order K1785-XX
TC-3 Self-Propelled Travel
Carriage
Carries head and controls in
either direction on a beam.
Operates manually or automati-
cally with the weld controls.
Requires 115V AC 50 or 60 hertz
input power.
Order K325x
CE Filter
The K2444-1 Power Wave AC/DC
1000™ CE Module is a high
power filter that enables the
K2344-2 Power Wave AC/DC
1000 CE "ready" machine to
conform to the EMC standards of
Europe and Australia. Electrically,
the module is connected between
the power line and the input of
the K2344-2 machine. The filter
provides high differential and
common mode attenuation to
reduce conducted emissions on
the power line.
Note: K2344-1 can not be used
with K2444-1 for CE confor-
mance.
Order K2444-1
•
•
•