Filter
Top Products
28
To turn it on, press
MENU until the FISH ID menu appears. Press UP
ARROW
to select TRACK ON, then press PWR. To turn it off, repeat the
above steps, but press
DOWN ARROW to select OFF. (If you want to turn
off FishTrack depths but leave Fish I.D. on, press
DOWN ARROW to
select
ON, then press PWR.) Remember, Fish I.D. must be on in order to
use the FishTrack feature.
Chart Scroll Speed
The rate that echoes scroll across the screen is called the
chart scroll speed. The default for this unit is "max" (100
percent). Adjust scroll speed by pressing
MENU until SCROLL
SPEED appears. Press UP ARROW to increase it and press
DOWN ARROW to decrease it. Press PWR to clear the menu.
Noise Reject and ASP™ (Advanced Signal Processing)
The ASP™ (Advanced Signal Processing) constantly
evaluates the effects of boat speed, water conditions and
electrical interference and automatically gives you the best
display possible under most conditions. The ASP feature has
three settings — Off, Low and High.
To change the ASP setting, press
MENU DOWN until NOISE REJECT
appears. Use the up and down arrow keys to select the desired setting,
then press
PWR to clear the menu.
Pro Tips
Your unit has a Pro Tips menu featuring fishing tips from
professional anglers.
To access Pro Tips, press the
MENU key until the Pro Tips
menu appears. Use the arrow keys to highlight
ON. The
menu will close and a fishing tip will appear. Use the arrow
keys to scroll through other fishing tips. Press
PWR to clear Pro Tips
from the screen.
Alarms
The sonar unit has three different types of alarms: fish, shallow and deep.
Fish Alarm
With Fish I.D. turned on, the Fish Alarm will sound a tone
when a fish symbol appears on the screen. Fish I.D. is
turned on by default.
To turn Fish I.D. on, press
MENU until the FISH ID menu
appears. Press
UP ARROW to select ON and then press PWR.
Press
MENU until the FISH ALARM menu appears. Press UP ARROW to
select
ON and then press PWR.