Filter
Top Products
MA1 NTENANCE
CAUTION
:
Always be sure that the tool
is
switched off and unplugged before attempting to perform
inspection or maintenance.
Cleaning
After use, remove wax, chips and dust from the tool, wheel tires and blade.
CAUTION
:
0
Never use solvents such
as
turpentine, gasoline, lacquer, etc. to clean plastic parts.
0
Wax and chips on the tires may cause the blade to slip and come off unexpectedly. Use
a
dry cloth to remove wax and chips from the tires.
Replacing tires on
wheels
When the blade slips or does not track pro-
perly because of badly worn tires, or the
lip of the tire on motor side
gets
damaged,
the tires should be replaced.
Wheel
I
Ask Makita Authorized or Factory Service Centers to replace them.
MA1 NTENANCE
CAUTION
:
Always be sure that the tool
is
switched off and unplugged before attempting to perform
inspection or maintenance.
Replacing carbon brushes
Remove and check the carbon brushes
regularly. Replace when they wear down
to the limit mark. Keep the carbon brushes
clean and free to slip in the holders. Both
carbon brushes should be replaced
at
the
same time. Use only identical carbon
brushes.
L
Limit mark
10
'I