Filter
Top Products
VOLTAGE WARNING: Before connecting the tool to a power source (receptacle,
outlet, etc.) be sure the voltage supplied is the same as that specified on the
nameplate of the tool.
A
power source with voltage greater than that specified
for the tool can result
in
SERIOUS INJURY to the user
-
as well as damage to
the tool.
If
in doubt,
DO
NOT PLUG IN THE TOOL. Using a power source with
voltage less than the nameplate rating is harmful to the motor.
ADDITIONAL SAFETY RULES
1
I.
,;e only blades which are
1,140
mm
(44-7/8")
long;
13
mm
(1/2")
wide;
and
0.5
mm
(.020")
thick.
2.
Check the blade carefully for cracks or damage before operation. Replace
cracked or damaged blade immediately.
3.
Secure the workpiece firmly. When cutting a bundle of workpieces, be sure
that all workpieces are secured together firmly before cutting.
4.
Cutting workpieces covered with
oil
can cause the blade to come off
unexpectedly. Wipe off all excess oil from workpieces before cutting.
5.
Never use cutting oil as a cutting lubricant. Use only Makita cutting wax.
6.
Do
not wear gloves during operation.
7.
Hold the tool firmly
with
both hands.
8.
When cutting metals, be cautious of hot flying chips.
9.
Do
not leave the tool running unattended.
IO.
Do
not touch the blade or the workpiece immediately after operation; they
may be extremely hot and could burn your skin.
SAVE THESE INSTRUCTIONS.
4