Filter
Top Products
Squaring blade with stopper
plate
Use
the triangular rule to make sure that
the side
of
the blade
is
square with the side
of the stopper plate. If not square, loosen
the bolts securing the stopper plate and
adjust the stopper plate accordingly.
Triangular
rule
Cutting lubricant
When cutting metals, use Makita cutting
wax
as
a
cutting lubricant.
To
apply
the
cutting wax to the blade teeth, start the
tool and cut in to the cutting wax
as
shown
in the figure.
CAUTION
:
0
Never use cutting oil or apply excessive amount of wax to the blade. It may cause the
0
When cutting cast iron, do not use any cutting lubricant.
blade to slip or come off unexpectedly.
Cutting operation
It
is
important to keep
at
least
two teeth in
the cut. Select the proper cutting position
for your workpiece by refering to the
figure
at
right.
,o,
x,
8