Filter
Top Products
Straight guide (optional accessory)
The straight guide
is
effectively used for
straight cuts when chamfering or grooving.
To
install the straight guide, insert the
guide bars into the holes in the tool base.
Adjust the distance between the bit and
the straight guide. At the desired distance,
tighten the wing bolts to secure the straight
guide in place.
1
J
When cutting, move the tool with the straight guide flush with the side of the workpiece.
If the distance (A) between the side of the
workpiece and the cutting position
is
too
wide for the straight guide, or if the side
of the workpiece
is
not straight, the
straight guide cannot be used.
In
this
case,
firmly clamp
a
straight board to the work-
piece and use
it
as
a
guide against the
router base. Feed the tool in the direction
of the arrow.
8