Filter
Top Products
Templet guide (optional accessory)
The templet guide provides
a
sleeve
through
which the bit passes, allowing use of the
router with templet patterns.
To install the templet guide, loosen the
screws on the tool base, insert the templet
Screw
Base
plate
-
I--
guide and then tighten the screws.
1
Templet
guide
Secure the templet to the workpiece. Place
the tool on the templet and move the tool
with the templet guide sliding along the
side of the templet.
MA1 NTENANCE
CAUTION
:
Always be sure that the tool
is
switched off and unplugged before attempting to perform
inspection or maintenance.
To maintain product SAFETY and
RELlABl LITY, repairs, carbon brush inspection
and replacement, any other maintenance or adjustment should be performed
by
Makita
Authorized or Factory Service Centers, always using Makita replacement parts.
9