Filter
Top Products
6
FUNCTIONAL
DESCRIPTION
CAUTION:
• Always be sure that the tool is switched off and
unplugged before adjusting or checking function on the
tool.
Adjusting depth of cut
To adjust the shoe, turn the thumb screw to loosen. Slide the
shoe to the desired position and tighten the thumb screw
securely. Check for the proper clearance beneath the work-
piece before cutting so that the bit will not strike a hard sur-
face such as the floor, workbench, etc.
Switch action
CAUTION:
• Before plugging in the tool, always check to see that the
switch lever actuates properly and returns to the ''OFF''
position.
To start the tool, move the switch lever to the ''ON'' position.
To stop the tool, move the switch lever to the ''OFF'' position.
This can be done in the forward area of the switch lever or by
bumping off the rear area of the switch lever.
ASSEMBLY
CAUTION:
• Always be sure that the tool is switched off and
unplugged before carrying out any work on the tool.
Installing or removing bit
CAUTION:
• Do not tighten the collet nut without inserting a bit, or the
collet cone will break.
1. Shoe
2. Thumb screw
001624
1
2
1. Switch lever
2. Bump off switch
001625
ONOFF
1
2