Filter
Top Products
9
Align the projections in the circular guide with the grooves in
the shoe, and secure the shoe and circular guide using the
thumb screw.
To adjust the cutting depth, proceed first by loosening the
thumb screw and then by sliding the shoe and circular guide
together. After completion of the adjustment, tighten the
thumb screw securely.
OPERATION
Operation
Loosen the knob, and adjust its position in accordance with
the size of the circle to be cut. (The hole dimensions to be cut
are indicated on the side of the circular guide as a general
guideline.) After completion of the adjustment, tighten the
knob securely.
Insert the end of the knob into the center of the circle to be
cut, and proceed to cut in a clockwise direction.
OPERATION
1. Shoe
2. Circular guide
3. Projections
001632
1
2
3
1. Shoe
2. Circular guide
3. Thumb screw
001633
1
2
3
1. Knob
2. Tighten
3. Loosen
001634
1
2
3
1. Knob
001635
1