Makita 420S Dust Collector User Manual


 
switch emits sparks when turned ON and
OFF,
and
so
does the motor
commutator during operation. A dangerous explosion may result.
13.
Do
not allow to be used as a toy. Close attention is neccessary when used
by or near children.
14.
Use only as described
in
this manual. Use only MAKITA's recommended
attachments.
15. Never use the dust collector
in
the rain. When not in use, store the dust
collector indoors.
16.
Do not use close to heat source (stoves, etc.). This can cause discoloration
and/or damage to the dust collector enclosures.
17.
Do not block cooling vents or intake hole during operation. Do not attempt
to pick up large items which may clog the dust collector.
18.
Keep proper footing and balance at all times.
19.
Use extra care when cleaning on stairs.
20.
DON'T ABUSE CORD. Never carry the dust collector by cord or yank
it
to
disconnect from receptacle. Keep cord away from heat, oil, and sharp edges.
Inspect cords periodically and
if
damaged, have repaired by authorized service
facility.
21.
Do
not fold, tug nor step on the hose.
22.
Stop the dust collector immediately
if
you
notice poor performance, unusual
23.
DISCONNECT THE DUST COLLECTOR. When not in use, before servicing,
24.
Use the cleaning lever frequently to clear the dust from the filter. Empty the
25.
Clean and service the dust collector immediately after each use to keep
it
26. Wear hearing protection during extended periods of operations.
27.
Never place the hose over or near your mouth or nostrils.
28.
REPLACEMENT PARTS. When servicing, use only identical replacement parts.
29.
Be kind to your dust collector. Rough handling can cause breakage of even
the most sturdily built dust collector.
30.
Wipe the dust collector off with a soft cloth dampened
in
detergent solu-
tion. Never use thinner or benzine. This can cause discoloration and cracks
in the dust collector enclosures.
vibrations or anything abnormal during operation.
and when changing accessories.
contents of the dust compartment before full.
in
tiptop operating condition.
SAVE
THESE INSTRUCTIONS.
3