Filter
Top Products
Cord
hook
Use the convenient cord hook
as
shown
at
right to prevent the power tool cord from
dangling around your legs. Your legs may
get
tangled with the dangling cord, causing
severe injury to you.
Cord
hook
Cleaning lever
A clogged filter causes poor suction per-
formance and potential damage to the
motor. Occasionally use the cleaning lever
to clear the dust from the filter. If suction
performance becomes poor, move the
cleaning lever back and forth about ten
times after turning off the dust collector.
Suction performance will recover.
Cleaning lever
CAUTION
:
Never apply excessive pressure to the cleaning lever.
It
may be broken.
Emptying out dust and dirt
CAUTION
:
Always switch off and unplug the dust collector before emptying out dust and dirt.
Move the cleaning lever back and forth
about ten times to clear the dust from the
filter. Unbuckle and open the dust com-
partment cover. Empty the contents of the
dust compartment. Always close the dust
compartment cover securely with
a
little
click after emptying out dust and dirt.
Hook
This dust collector
is
equipped with
a
con-
venient large hook. Use
it
for hanging the
dust collector from
a
beam, scaffold, etc.
However, never hang the dust collector in
slippery or insecure places. The dust col-
lector may fall. This will cause damage
to the dust collector and/or injury to you
or
somebody
else.
Dust
commrt-’