Filter
Top Products
Operation
1)
When using without your power tool
connected
:
To start the dust collector, press the
"ON'
side of the switch. Press the
"OFF"
side of the switch to stop.
2
When using with your power tool con-
nected
:
This
dust collector has an outlet for
ac-
cepting the plug
of
your power tool.
When your power tool
is
plugged into
this outlet and the dust collector
is
switched on, the dust collector will be
in
its
"AUTO-ON" condition and will
start or stop automatically when you
turn your power tool on or off.
Switch
OUl
CAUTION
:
0
Maximum input of power tools which can be connected to the dust collector
is
12
A.
Check the power tool nameplate carefully before you attempt to connect the power
tool.
0
Always be sure that the dust collector and your power tool are switched off and un-
plugged before connecting your power tool to the dust collector.
Overload protector
The overload protector on the dust col-
lector automatically cuts out to stop the
dust collector and your power tool, when-
ever heavy work
is
prolonged. If this
occurs, switch off both the dust collector
and your power tool, and wait
20
-
30
seconds before pressing the restart button
to resume operation.
CAUTION
:
Do
not keep the restart button pressed with tape,
etc.
6