Filter
Top Products
To
attach the circular guide, use the pin,
inserting
it
in the center hole (arrow) and
secure
it
with the threaded knob. Then
slide the base of the tool forwards. The
circular guide attaches to the base of the
tool in the same manner
as
the guide rule
(rip fence).
Metal
cutting
Always use
a
suitable coolant (cutting oil)
when cutting metal. Failure to do
so
will
cause significant blade wear.
Fit
pin into
the
hole
Pin
for
circular guide
b
The
underside of the workpiece can be
greased instead
of
using
a
coolant.
10