Filter
Top Products
Switch
action
Tool speed
is
increased
by
increasing pres-
sure on the trigger. To start the tool, simply
pull the trigger.
Release
the trigger to stop.
For continuous operation, pull
the
trigger
and then push in the lock button. To stop
the tool from the locked position, pull the
trigger fully,
then
release
it.
Lock
button
/
CAUTION
:
Before plugging in the tool, always check to
see
that the trigger switch actuates properly
and returns to the "OFF" position when released.
Operation
Turn the tool
on
and wait until the blade
attains full speed. Then rest the base flat
on
the workpiece and gently move the tool
forward along the previously marked cut-
ting line. When cutting curves, advance the
tool very slowly.
I
I
CAUTION
:
Failure to hold the tool base flush with the workpiece may cause blade breakage.
Bevel
cutting
With the base tilted, you can make bevel
cuts
at
any angle between
0"
and
45"
(left
or right).
7