Filter
Top Products
Using guide rule (Rip fence)
When cutting widths
of
under
150mm
(6")
repeatedly, use
of
the guide rule will assure
fast, clean, straight cuts.
To
attach the guide rule (rip fence), secure
the rule holder to the base with the screw
(do not tighten).
Insert the guide rule between the base and
the rule holder. Now tighten the screw
with the hex wrench.
Using circular guide
Use
of
the circular guide insures clean,
smooth cutting of circles (radius, under
200
mm;
7-7/8")
and arcs.
I
Circular
guide
-
9