Filter
Top Products
Metal cutting
Always use
a
suitable coolant (cutting oil) when cutting metal. Failure to do
so
will
cause
significant
blade
wear.
The
underside
of
the workpiece
can
be greased instead
of
using
a
coolant.
Anti-splintering device
To
reduce the potential for workpiece sur-
face splintering, the anti-splintering device
can be used. Fit it into the base from below
so
that
it
surrounds the sides
of
the blade.
Plastic base plate (optional accessory)
Use the plastic base plate when cutting
decorative veneers, plastics, etc. It protects
sensitive or delicate surfaces from damage.
To
replace the base plate, remove the four
screws with the hex wrench.
Guide rule (rip fence; optional accessory)
When cutting widths
of
under
150
mm
(5-29/32")
repeatedly, use
of
the guide rule
will assure fast, clean, straight cuts.
To
install it, loosen the bolt on the front
of
the
base.
Slip in
the
guide rule
and
secure the
bolt.
Anti-sprintering device
L
13