Filter
Top Products
Adjusting depth
of
cut
Loosen the lever on the depth guide and
move the base up or down. At the desired
depth of cut, secure the base by tightening
the lever.
This tool is equipped with the dust box to
collect dust and cut chips. For the best cut-
ting performance, empty the dust box each
time the battery cartridge is completely dis-
charged. Press the lever and open the dust
cap. Tip the rear of the tool down to empty
the dust box.
Cleaner cutting operations can be per-
formed by connecting this tool to Makita
vacuum cleaner. Remove the rubber cap
from the dust cap and connect the hose
of
vacuum cleaner to the dust cap.
CAUTION:
Use
a
shallow depth of cut when cutting thin workpiece for cleaner, safer cuts.
After adjusting the depth
of
cut, always tighten the lever securely.
I
I
Dust
cap
.,,_..
..
_5
Sighting
When cutting, align the left side of notch in
the front of the base with your cutting line
on the workpiece.
Dust collection
CAUTIO N:
Never cut workpieces coveredbtained with thinner, gasoline, oil or the like. If the dust box
13