Filter
Top Products
OPERATION
Hold the tool firmly. Set the base plate on
the workpiece to be cut without the blade
making any contact. Then turn the
tool
on
and
wait
until the blade attains
full
speed.
Now simply move the tool forward over
the workpiece surface, keeping it flat and
advancing smoothly until the sawing is
completed.
To
get clean cuts, keep your
sawing line straight and
your
speed of
advance uniform.
CAUTION:
*Always gently keeps the tool moving straight ahead when cutting. Forcing or twisting
the tool will result in overheating of the motor and dangerous kickback, possibly causing
severe injury.
If the tool is operated continuously until the batten/ cartridge has discharged, allow the
tool to rest for
15
minutes before proceeding with
a
fresh battery.
Use a shallow depth
of
cut when cutting thin workDieces for cleaner, safer cuts. (For
5026DA, 5026DB, 5036DA and 5036DB only)
For
5046DA
and
5046DB
only
When
you
cut angle materials or the like,
the lower guard (safety cover) may rest on
the angle.
If
so,
tilt other rear of the tool
to
prevent
this.
Lower
guard (safety
cover) rests
on angle
Tilt