Filter
Top Products
Switch action
CAUTION:
Before inserting the battery cartridge into the tool, always check to see that the switch
trigger actuates properly and returns to the
"OFF"
position when released.
To prevent the switch trigger from being
accidentally pulled,
a
lock-off button is pro-
vided.
To
start the tool, depress the lock-off but-
ton and pull the switch trigger. Release the
switch trigger to stop.
Guide rule
The handy guide rule allows you to do
extra-accurate straight cuts. Simply slide
the guide rule up snugly against the side of
the workpiece and secure
it
in position with
the clamp screw on the front of the base. It
also makes repeated cuts of uniform width
possible.
Switch
trigger
Lock-off
buttonzl
14