Filter
Top Products
Bubble level
This
tool
is equipeed with a bubble level
to
aid in holding the
tool
horizontally. Simply
center the bubble in the sight window.
4.5 (11/64")
Bubble
level
7
2.9
-
3.2
(7/64
-
1
/8")
Screwdriving operation
Place the point
of
the driver bit in the
screw head and apply pressure
to
the
tool.
Start the
tool
slowly and then increase the
speed gradually. Release the trigger just as
the screw bottoms out. The electric brake
will then stop the
tool
immediately, pre-
venting the screw and/or bit from being
damaged.
NOTE
:
0
Make sure that the driver bit is inserted straight in the screw head,
or
the screw and/or
bit may be damaged.
owhen driving wood screws, predrill Pilot
holes
to
make driving easier and
to
pre-
3.1 (1/8")
3.5 (9/64") (3/32
-
3/32")
vent splitting
of
the workpiece. See the
chart.
I
2.5
-
2.8
(3132
-
7/64")
3.8 (5/32")
9