Filter
Top Products
14.
REMOVE ADJUSTING
KEYS
AND WRENCHES. Form habit
of
checking to
see
that keys and adjusting wrenches are removed from tool before turning
it
on.
15.
AVOID UNINTENTIONAL STARTING. Don't carry plugged-in
tool
with finger
on switch.
Be
sure switch
is
OFF when plugging in.
16.
OUTDOOR
USE
EXTENSION CORDS. When
tool
is
used outdoors, use only
extension cords intended
for
use outdoors and
so
marked.
17.
STAY ALERT. Watch what you are doing, use common sense. Don't operate
tool
when you are tired.
18.
CHECK DAMAGED PARTS. Before further use of the
tool,
a guard
or
other
part that
is
damaged should be carefully checked to determine that it will
operate properly and perform its intended function. Check
for
alignment of
moving parts, binding
of
moving parts, breakage
of
parts, mounting, and any
other conditions that may affect its operation. A guard
or
other part that
is
damaged should be properly repaired
or
replaced by an authorized serv-
ice
center unless otherwise indicated elsewhere in this instruction manual.
Have defective switches replaced by authorized service center. Don't use
tool if switch does not turn
it
on and off.
19.
GUARD AGAINST ELECTRIC SHOCK. Prevent body contact with grounded
surfaces.
For
example; pipes, radiators, ranges, refrigerator enclosures.
20.
REPLACEMENT PARTS. When servicing, use only identical replacement parts.
VOLTAGE WARNING: Before connecting the tool
to
a power source (receptacle,
outlet, etc.) be sure the voltage supplied
is
the same as that specified on the
nameplate of the tool. A power source with voltage greater than that specified
for the tool can result in SERIOUS INJURY to the user
-
as
well
as damage to
the tool.
If
in doubt,
DO
NOT PLUG
IN
THE TOOL. Using a power source with
voltage
less
than the nameplate rating
is
harmful to the motor.
3