Filter
Top Products
Switch action
Tool
speed is increased by increasing pres-
sure
on
the trigger.
To
start the tool,
simply pull the trigger. Release the trigger
to stop.
CAUTION
:
Before inserting the battery cartridge into the tool, always check
to
see
that
the trigger
switch actuates properly and returns to the
"OFF"
position when released.
Reversing switch action
This tool has a reversing switch to change
the direction of rotation. Slide the revers-
ing switch
to
the
right
for clockwise rota-
tion
or
to the left for counterclockwise.
Reversino
switch
1
CAUTION
:
0
Always check the direction of rotation before operation.
.Use the reversing switch only when the tool comes to
a
complete stop. Changing the
direction
of
rotation before the
tool
stops may
ruin
the tool.
Speed
change
To change the tool speed,
turn
the speed
change knob
so
that
the arrow
of
the de-
sired speed on the knob is aligned with the
0
-
400
R/min.
Speed
change
knob
refet-ence arrow
on
the
tool
body.
If
the
speed change knob does
not
turn
easily,
switch
on
the
tool
and
turn
the knob again
while the tool
is
running
under
no
load.
8