Filter
Top Products
ADDITIONAL SAFETY RULES
FOR CHARGER AND TOOL
1.
The Charger and the tool are specifically designed to work together. Do not
attempt to charge any other cordless tool
with
this Charger.
Do
not attempt
to charge the tool with any other charger.
2.
Do not charge the tool when temperature is BELOW 10°C (5OOF) or ABOVE
45OC (113OF).
3.
Do not use charger
in
damp or wet locations.
4.
Do not attempt to use a step-up transformer, an engine generator or DC power
5. Do not store the tool
in
locations where the temperature may reach or exceed
6.
Do not incinerate the tool even if
it
is severely damaged or is completely worn
receptacle.
5OoC (122OF).
out. The tool can explode
in
a fire.
ADDITIONAL SAFETY RULES
1.
Be aware that this tool is always
in
an operating condition, because
it
does
2.
Always be sure you have a firm footing.
3.
Hold the tool firmly.
4.
Keep hands away from rotating parts.
5. When drilling into walls, floors or wherever "live" electrical wires may be
encountered, DO NOT TOUCH ANY METAL PARTS
OF
THE TOOL!
Hold the tool only by the insulated grasping surfaces to prevent electric shock
if
you drill into a "live" wire.
not have to be plugged into an electrical outlet.
Be sure no one is below when using the tool
in
high
locations.
6.
Do not leave the tool running. Operate the tool only when hand-held.
7.
Do not touch the drill bit or the workpiece immediately after operation: they
may be extremely hot and could burn your skin.
SAVE THESE INSTRUCTIONS.
5