Filter
Top Products
Switch
action
Move the reversing switch lever to the
"FWD" position for colckwise rotation or
the
"REV"
position for counterclockwise.
Tool
speed
is
increased by increasing pres-
sure on the tigger.
To
start the tool, simply
pull the trigger.
Release
the trigger to stop.
When the reversing switch lever
is
in the
neutral position, the tool will not start
even if you pull the trigger.
CAUTION
:
a
Always check the direction of rotation before drilling.
*Use the reversing switch lever only when the tool comes to
a
complete stop. Changing
a
When not operating the tool, keep the reversing switch lever in the neutral position.
the direction of rotation before the tool stops may ruin the tool.
7