Filter
Top Products
ADDITIONAL SAFETY RULES
FOR
CHARGER
&
BATTERY CARTRIDGE
1.
Do not charge Battery Cartridge when temperature is BELOW
10°C
(SOOF)
or ABOVE
4OoC (104OF).
2.
Do not attempt to use a step-up transformer, an engine generator or DC power
3.
Do not allow anything to cover or clog the charger vents.
4.
Always cover the battery terminals with the battery cover when the battery
5. A battery short can cause a large current flow, overheating, possible burns
receptacle.
cartridge
is
not
used.
and even a breakdown.
(1)
Do not touch the terminals with any conductive material.
(2)
Avoid storing battery cartridge in a container with other metal objects such
(3)
Do not expose battery cartridge to water or rain.
ture may reach or exceed 5OoC
(122OF).
completely worn out. The battery cartridge can explode
in
a fire.
as nails, coins, etc.
6.
Do not store the tool and Battery Cartridge in locations where the tempera-
7.
Do not incinerate the Battery Cartridge even if
it
is severely damaged or is
ADDITIONAL SAFETY RULES
FOR
CORDLESS SCREWDRIVER AND DRILL
1.
Be aware that this tool is always in an operating condition, because
it
does
2.
Always be sure you have a firm footing.
3.
Hold the tool firmly.
4.
Keep hands away from rotating parts.
5. When drilling into walls, floors or wherever "live" electrical wires may be en-
countered, DO NOT TOUCH ANY METAL PARTS
OF
THE TOOL!
Hold the tool only by the plastic handle or plastic tool body to prevent electric
shock if you drill into a "live" wire.
not have to be plugged into an electrical outlet.
Be sure no one is below when using the tool
in
high locations.
6.
Do not leave the tool running. Operate the tool only when hand-held.
7.
Do not touch the drill bit or the workpiece immediately after operation, they
may be extremely hot and could burn your skin.
SAVE THESE INSTRUCTIONS.
5