Filter
Top Products
Hole
0The hole on the heel
of
the tool
is
a
con-
venient way to carry
it
by
a
cord, hook
or other means.
Drill chuck (Accessory)
0
To
install
a
drill chuck, remove the insert
bit by
a
strong jerk, then
a
drill chuck can
be replaced with the insert bit by
a
sharp
push
of
the hand.
.To
install the drill bit, place
it
in the
chuck
as
far
as
it
will go. Tighten the
chuck collar
by
hand.
Place
the chuck
key in each of three holes, and tighten
clockwise.
0
To
remove the drill bit, place the chuck key into the chuck hole and turn counterclock-
wise.
CAUTIONS:
0
Be sure that the battery cartridge has been removed from the tool.
Always
set
the
Forward-Reverse switch lever to
NEUTRAL
when installing, removing
or adjusting bits or accessories.
9