Filter
Top Products
Charging
Connect the charging plug
to
the charging
connector, then plug in the charger to the
power receptacle. Charging takes
3
hours.
CAUTION
:
0The battery in your new tool
is
not fully charged. You will need to charge
it
before use.
0
Do
not operate the tool during charging.
0
Overcharging more than
2
days considerably shortens the battery service life. Always
unplug the charger after completing the charge.
When you charge
a
new tool or
a
tool which has not been used for
a
long period,
it
may
not accept
a
full charge. This
is
a
normal condition and does not indicate
a
problem.
You can recharge the tool fully after discharging
it
almost completely
a
couple of times.
Installing bit
To
install the bit, insert
it
into the tool
as
far
as
it
will go.
Switch action
I
To start the tool, move the slide switch
forward. Release
it
to stop.
Slide
switch
6