Filter
Top Products
Manual driving operation
This tool can be used
as
a
manual screwdriver when the switch
is
in the off position.
Be
sure to keep your finger off the switch when performing manual driving operation
Application Dimensions
of
screw Workpiece
CAUTION:
When performing manual driving operation,
do
not insert
a
screwdriver, etc. into the
hole in the end of the tool to increase
torque on the screw. This may cause tool
damage.
Fastenings
3.1 mm
x
20 mm
(1
/8”
x 3/4”)
(5/32“ x 3/4”)
Lauan wood
Wood screws
220 screws
1
10
screws
~~~~~ ~
Machine screws
1
5
mm
(13/64”)
I I
400 screws
MAINTENANCE
CAUTION
:
Always be sure that the tool
is
switched off before attempting to perform inspection or
maintenance.
To maintain product SAFETY and RELlABl LITY, repairs, maintenance or adjustment
should be performed by Makita Authorized or Factory Service Centers, always using
Makita replacement parts.
8