Filter
Top Products
Reversing switch action
This tool has
a
reversing switch to change
the direction
of
rotation. Move
the
revers-
ing switch lever to the
&?
position for
clockwise rotation or the position for
counterclockwise.
Reversing
switch
lever
1
CAUTION
:
Always check the direction of rotation before operation.
*Use the reversing switch only when the tool comes to
a
complete stop. Changing the
direction of rotation before the tool stops may ruin the tool.
Operation
Fit the screw
on
the point of the bit and
place the point
of
the screw on the surface
of the workpiece to be fastened. Apply
pressure to the tool and start
it.
Withdraw
the
tool
as
soon
as
the clutch cuts in.
Then release the trigger.
CAUTION
:
0
Use the proper bit for the head of the screw that you wish to use.
When fitting the screw onto the point of the bit, be careful not to push in on the screw.
If the screw
is
pushed in, the clutch will engage and the screw will rotate suddenly. This
could damage
a
workpiece or cause an injury.
Do
not continue unnecessary clutching operation.
7