Filter
Top Products
ADDITIONAL SAFETY RULES
FOR CHARGER
&
BATTERY CARTRIDGE
1.
Do
not charge Battery Cartridge when temperature is BELOW 10°C
(5OOF)
2.
Do
not attempt to use a step-up transformer, an engine generator or DC power
or ABOVE 4OoC (104OF).
receptacle.
3.
Do
not allow anything to cover or clog the charger vents.
4.
Do
not short the battery cartridge:
(1)
Do
not touch the terminals with any conductive material.
(2)
Avoid storing battery cartridge
in
a container with other metal objects such
(3)
Do
not expose battery cartridge to water or rain.
as nails, coins, etc.
A battery short can cause a large current flow, overheating, possible burns
and even
a
breakdown.
5.
Do
not store the tool and Battery Cartridge
in
locations where the tempera-
6.
Do
not incinerate the Battery Cartridge even if
it
is severely damaged or is
ture may reach or exceed 5OoC (122OF).
completely worn out. The battery cartridge can explode
in
a fire.
ADDITIONAL SAFETY RULES
1.
Be aware that this tool is always
in
an operating condition, because
it
does
2.
Wear ear protectors.
3.
Hold the tool firmly.
4.
Always be sure you have a firm footing.
Be sure no one is below when using the tool
in
high locations.
5.
When driving into walls, floors or wherever "live" electrical wires may be
encountered,
DO
NOT TOUCH ANY METAL PARTS
OF
THE TOOL!
Hold the tool only by the insulated grasping surfaces to prevent electric shock
if you drive into a "live" wire.
not have to be plugged into an electrical outlet.
SAVE THESE INSTRUCTIONS.
5