Filter
Top Products
Installing or removing the battery cartridge
0
Always switch off the tool before insertion or removal of the battery cartridge.
DC1290
Approx.
60
min.
1200
1201
/I
201
A
-
0
To
remove the battery cartridge, pull out
the
set
plate on the tool and grasp both
sides
of
the cartridge while withdrawing
it
from the tool.
0
To
insert the battery cartridge, align the
tongue on
the
battery cartridge with the
groove in the housing and slip
it
into
place. Snap the
set
plate back into place.
Be sure to close the
set
plate fully before
using the tool.
DC1201
Approx.
45
min.
Approx.
60
min.
\
Battery cartridge
1
0
Do not use force when inserting the battery cartridge.
If the cartridge does not slide in easily,
it
is
not being inserted correctly.
Charging
0
Your new battery cartridge
is
not charged.
You will need
to
charge
it
before use. Use
the fast charger Model DC1201 to charge
the battery cartridge.
0
Plug the fast charger into the proper A/C
voltage source. The charging light will
flash in green color.
0
Insert the battery cartridge
so
that the
plus and minus terminals on the battery
cartridge are on the same sides
as
their
respective markings on the fast charger.
Charging light
6