Filter
Top Products
NOTE
:
If the bit
is
not inserted deep enough into the sleeve, the
sleeve
will not return to
its
original position and the bit will not be secured. In this case, try re-inserting the bit
according to the instructions above.
Switch action
Tool speed
is
increased
by
increasing pres-
sure on the trigger. To start the tool,
simply pull the trigger.
Release
the trigger
to stop.
Swi
tch
trigger
CAUTION
:
Before
inserting the battery cartridge into the tool, always check to
see
that the switch
trigger actuates properly and returns to the
"OFF"
position when released.
Reversing switch action
This tool has
a
reversing switch to change
the direction of rotation. Move the revers-
ing switch to the left for clockwise rotation
or to the right for counterclockwise.
I
I
CAUTION
:
Always check the direction of rotation before operation.
Use the reversing switch only after the tool comes to
a
complete
stop.
Changing the
'
direction of rotation before the tool stops may damage the tool.
8