Filter
Top Products
.. ..
..
....
Replacing carbon brushes
Remove and check the carbon brushes
regularly. Replace when they wear down to
the limit mark. Keep the carbon brushes
clean and free to slip in
the
holders. Both
carbon brushes should be replaced
at
the
same time. Use only identical carbon
brushes.
MAINTENANCE
CAUTION
:
Always be sure that the tool
is
switched off and unplugged before attempting to perform
inspection or maintenance.
-
Open the protector. Use
a
screwdriver to
remove the brush holder caps. Take out the
worn carbon brushes, insert the new ones
and secure the brush holder caps.
Brush
holder
c
To
maintain product SAFETY and RELIABILITY, repairs, any other maintenance or
adjustment should be performed by Makita Authorized or Factory Service Centers,
always using Makita replacement parts.
8