Filter
Top Products
Installing side grip (auxiliary handle)
Always install the side grip
on
the tool
securely before operation. The side grip can
be installed in any of three positions on the
sides of the tool, whichever is convenient
and keeps the guard properly positioned.
Always hold the tool’s switch handle and the
side grip firmly with both hands during
operation.
I
WARN
I
NG
:
Side grip only in such a way that grinding wheel will not contact any part of your body
and that wheel guard always remains positioned as a barrier between the grinding wheel
and the operator. Failure to do
so
may result in serious injury.
Installing
or
removing abrasive disc
CAUTION:
Always be sure that the tool is switched off and unplugged before installing or removing
the disc.
NOTE:
Use sander accessories specified in this manual. These must be purchased by separate.
Mount the rubber pad onto the spindle. Fit
the disc on over the rubber pad and screw
the lock nut onto the spindle.
Lock
nut
6