Makita BHP453 Cordless Drill User Manual


  Open as PDF
of 6
 
P 5/ 6
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-4. Leaf Spring
ASSEMBLING
Leaf spring
protrusion of Switch
Fit the protrusion of Switch into
the notch of F/R Change lever,
and insert the ends of F/R change
lever to the holes of Housing set
(L) and (R).
notch of
F/R change lever
Housing set (L)
Leaf spring has to be mounted to Housing set (L)
as illustrated in Fig. 11 before assembling Gear
ass’y and DC motor.
F/R Change lever can be assembled to Switch as
illustrated in Fig. 12.
ASSEMBLING
ASSEMBLING
Fig. 12
Fig. 11
Leaf spring
[3]-5. F/R Change Lever
[3]-6. Cushion
Fig. 13R Fig. 19F
Be sure to install Cushion into Housing set (L) as illustrated in Fig. 13R.
Note: Fig. 13F is the wrong installation. Pay attention to the direction.
[Correct]
[Wrong]
CushionHousing set (L)
Housing set (L) Cushion
 previous