Filter
Top Products
P 5/10
Repair
[3] DISASSEMBLY/ASSEMBLY
[3]-2. Gear assembly and Motor section
(3) Disassemble Gear assembly and Motor section. (Fig. 9)
Fig. 9
DISASSEMBLING
3. Unscrew nine 3x16 Tapping screws,
then remove Housing (R).
4. Remove the assembly of
Motor section and Gear section.
Housing (R)
5. Remove Speed change lever,
then separate Gear assembly
from Motor section.
6. Remove Armature along with Yoke unit
from Brush holder complete.
Gear assembly
Brush holder
complete
Armature
Yoke unit
Armature
7. Pull Armature from Yoke unit.
Yoke unit
Motor section
Speed change lever